[Jan 19, 2026] Pass Your FCP_FAZ_AD-7.4 Dumps Free Latest Fortinet Practice Tests
Get Top-Rated Fortinet FCP_FAZ_AD-7.4 Exam Dumps Now
Fortinet FCP_FAZ_AD-7.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 39
What purposes does the auto-cache setting on reports serve? (Choose two.)
- A. To reduce report generation time
- B. To reduce the log insert lag rate
- C. To automatically update the hcache when new logs arrive
- D. To provide diagnostics on report generation time
Answer: A,C
NEW QUESTION # 40
Which two statements about log forwarding are true? (Choose two.)
- A. The client retains a local copy of the logs after forwarding.
- B. Forwarded logs cannot be filtered to match specific criteria.
- C. You can use aggregation mode only with another FortiAnalyzer.
- D. Logs are forwarded in real-time only.
Answer: A,C
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/420493/modes
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/621804/log-forwarding
NEW QUESTION # 41
Refer to the exhibit.
Which image corresponds to the packet capture shown in the exhibit?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: A
Explanation:
FortiAnalyzer Administrator 7.2 Study Guide p. 183 OFTP is used over SSL when information is synchronized between FortiAnalyzer and FortiGate. OFTP listens on port TCP/514. Port UDP/514 is used for unencrypted log communication.
NEW QUESTION # 42
Refer to the exhibit.
Based on the output, what can you conclude about the FortiAnalyzer logging status?
- A. The connection between FortiGate and FortiAnalyzer is overloaded.
- B. FortiGate is configured to send logs in batches.
- C. FortiGate is sending logs again after it performed a reboot.
- D. FortiGate has logs to send, but FortiAnalyzer is unavailable.
Answer: D
Explanation:
The output shows that FortiGate has sent a large number of logs (sent=180189698), but some logs have failed to be sent (failed=4507). This suggests that FortiAnalyzer was temporarily unavailable or had an issue receiving logs, leading to the failure count. There are no logs cached or dropped, indicating FortiGate is still attempting to send logs but with some failures.
NEW QUESTION # 43
View the exhibit:
What does the 1000MB maximum for disk utilization refer to?
- A. The disk quota for each device in the ADOM
- B. The disk quota for all devices in the ADOM
- C. The disk quota for the ADOM type
- D. The disk quota for the FortiAnalyzer model
Answer: B
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/743670/configuring-log-storage- policy
NEW QUESTION # 44
Refer to the exhibit.
Which statement is correct regarding the event displayed?
- A. The security event risk is considered open.
- B. The security risk was blocked or dropped.
- C. The risk source is isolated.
- D. An incident was created from this event.
Answer: A
Explanation:
Events in FortiAnalyzer will be in one of four statuses. The current status will determine if more actions need to be taken by the security team or not.
The possible statuses are:
Unhandled: The security event risk is not mitigated or contained, so it is considered open.
Contained: The risk source is isolated.
Mitigated: The security risk is mitigated by being blocked or dropped.
(Blank): Other scenarios.
FortiAnalyzer_7.0_Study_Guide-Online pag. 206
NEW QUESTION # 45
An administrator has moved FortiGate A from the root ADOM to ADOM1.
Which two statements are true regarding logs? (Choose two.)
- A. Logs will be presented in both ADOMs immediately after the move.
- B. Analytics logs will be moved to ADOM1 from the root ADOM automatically.
- C. Archived logs will be moved to ADOM1 from the root ADOM automatically.
- D. Analytics logs will be moved to ADOM1 from the root ADOM after you rebuild the ADOM1 SQL database.
Answer: C,D
Explanation:
Reference: https://community.fortinet.com/t5/Fortinet-Forum/FW-Migration-between-ADOMs/m-p/32683?
m=158008
NEW QUESTION # 46
Which two parameters impact the amount of reserved disk space required by FortiAnalyzer? (Choose two.)
- A. Disk size
- B. RAID level
- C. Total quota
- D. License type
Answer: A,B
Explanation:
Disk size - This is a fundamental parameter. The total disk size directly impacts how much space is available for storing logs, reports, and other data. A larger disk size means more space is available, which can influence the reserved space portion proportionally.
RAID level - The RAID (Redundant Array of Independent Disks) configuration used affects how disk space is utilized. Different RAID levels offer varying balances of performance, data availability, and storage capacity. For example, RAID 1 mirrors the entire contents of the disk, effectively halving the storage capacity for data protection, while RAID 5 uses striping with parity and offers better space efficiency but requires space for parity information.
NEW QUESTION # 47
What FortiGate process caches logs when FortiAnalyzer is not reachable?
- A. logfiled
- B. oftpd
- C. miglogd
- D. sqlplugind
Answer: C
Explanation:
The miglogd process on FortiGate is responsible for handling log forwarding and caching. When FortiAnalyzer is unreachable, miglogd temporarily stores logs in a local cache until the connection is restored.
This prevents log loss during temporary network interruptions or FortiAnalyzer outages.
Reference: https://forum.fortinet.com/tm.aspx?m=143106
NEW QUESTION # 48
An administrator fortinet, is able to view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mall server that can be used to send email.
What could be the problem?
- A. ADOM mode is configured with Advanced mode.
- B. Fortinet is assigned the Restricted_ User administrator profile.
- C. Fortinet is assigned the Standard_ User administrator profile.
- D. A trusted host is configured.
Answer: C
Explanation:
* Super_User, which, like in FortiGate, provides access to all device and system privileges.
* Standard_User, which provides read and write access to device privileges, but not system privileges.
* Restricted_User, which provides read access only to device privileges, but not system privileges. Access to the Management extensions is also removed.
* No_Permissions_User, which provides no system or device privileges. Can be used, for example, to temporarily remove access granted to existing admins.
FortiAnalyzer_7.0_Study_Guide-Online page 42
NEW QUESTION # 49
Which two statements are true regarding FortiAnalyzer system backups? (Choose two.)
- A. The system reserves at least 5% to 20% disk space for backup files.
- B. Scheduled system backups can be configured only from the CLI.
- C. Existing reports can be included in the backup files.
- D. Backup files can be uploaded to SCP and SFTP servers.
Answer: C,D
Explanation:
FortiAnalyzer allows for the inclusion of existing reports in the backup files, providing a comprehensive backup of configurations and data. Additionally, the backup files can be configured to be uploaded to SCP and SFTP servers, ensuring secure transfer and offsite storage of backup data. This can be configured both in the GUI and the CLI, providing flexibility in how backups are scheduled and managed.
Reference: FortiAnalyzer 7.4.1 Administration Guide, "Scheduling automatic backups" section.
NEW QUESTION # 50
Logs are being deleted from one of the ADOMs earlier than the configured setting for archiving in the data policy.
What is the most likely problem?
- A. The total disk space is insufficient and you need to add other disk
- B. CPU resources are too high
- C. The ADOM disk quota is set too low, based on log rates
- D. Logs in that ADOM are being forwarded, in real-time, to another FortiAnalyzer device
Answer: C
Explanation:
Reference: https://help.fortinet.com/fmgr/50hlp/56/5-6-1/FMG-FAZ/1100_Storage/0017_Deleted%20device%
20logs.htm
NEW QUESTION # 51
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?
- A. There is no need to do anything because the disk will self-recover.
- B. Run execute format disk to format and restart the FortiAnalyzer device.
- C. Perform a hot swap of the disk.
- D. Shul down FortiAnalyzer and replace the disk.
Answer: C
Explanation:
In systems that support hardware RAID, hot swapping allows for the replacement of a failed disk without shutting down the system. This capability is crucial for maintaining uptime and ensuring data redundancy and availability, especially in critical environments. The RAID controller rebuilds the data on the new disk using redundancy data from the other disks in the array, ensuring no data loss and minimal impact on system performance.
In the context of a FortiAnalyzer unit equipped with hardware RAID support, the optimal approach to addressing a hard disk failure is to perform a hot swap of the disk. Hardware RAID configurations are designed to provide redundancy and fault tolerance, allowing for the replacement of a failed disk without the need to shut down the system. Hot swapping enables the administrator to replace the faulty disk with a new one while the system is still running, and the RAID controller will rebuild the data on the new disk, restoring the RAID array to its fully operational state.
Reference: FortiAnalyzer 7.2 Administrator Guide - "Hardware Maintenance" and "RAID Management" sections.
NEW QUESTION # 52
Which statement is true about using aggregation mode on FortiAnalyzer?
- A. Aggregation mode supports log filters.
- B. Aggregation mode can be configured only on the CLI.
- C. In aggregation mode, logs and content files are forwarded in real time.
- D. Aggregation mode can work with syslog servers.
Answer: C
Explanation:
Aggregation mode allows FortiAnalyzer to collect and forward logs to another FortiAnalyzer or Syslog server in real time. This is useful for log data management in large deployments or distributed network environments.
NEW QUESTION # 53
What happens when the IOC breach detection engine on FortiAnalyzer finds web logs that match a blocklisted IP address?
- A. The detection engine classifies those logs as Suspicious
- B. The endpoint is marked as Compromised and. optionally, can be put in quarantine.
- C. A new Infected entry is added for the corresponding endpoint.
- D. FortiAnalyzer flags the associated host for further analysis.
Answer: C
NEW QUESTION # 54
In Log View, you can use the Chart Builder feature to build a dataset and chart based on the filtered search results.
Similarly, which feature you can use for FortiView?
- A. Export to Custom Chart
- B. Export to Report Chart
- C. Export to Chart Builder
- D. Export to PDF
Answer: B
Explanation:
Reference: https://community.fortinet.com/t5/FortiAnalyzer/Creating-a-Custom-report-from-FortiView- Export-to-Report-Chart/ta-p/190154?externalID=FD40483 Similar to the Chart Builder feature in Log View, you can export a chart from a FortiView. The chart export includes any filters you set on the FortiView. FortiAnalyzer_7.0_Study_Guide-Online pag. 292.
NEW QUESTION # 55
Which clause is considered mandatory in SELECT statements used by the FortiAnalyzer to generate reports?
- A. LIMIT
- B. ORDER BY
- C. WHERE
- D. FROM
Answer: D
Explanation:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD48500
NEW QUESTION # 56
Which process caches logs on FortiGate when FortiAnalyzer is not reachable?
- A. logfiled
- B. oftpd
- C. miglogd
- D. sqlplugind
Answer: C
NEW QUESTION # 57
Which statement when you are upgrading the firmware on an HA cluster made up of three FortiAnalyzer devices is true?
- A. Enabling uninterruptible-upgrade prevents normal operations from being interrupted during the upgrade.
- B. First, upgrade the secondary devices, and then upgrade the primary device.
- C. You can perform the firmware upgrade using only a console connection.
- D. All FortiAnalyzer devices will be upgraded at the same time.
Answer: B
Explanation:
When upgrading firmware on an HA cluster of FortiAnalyzer devices, it is recommended to upgrade the secondary devices first, and then upgrade the primary device to minimize downtime and maintain continuity in log collection and other HA functions. This ensures that the primary device continues to handle operations while the secondary devices are being upgraded, and once the secondary devices are updated, the primary device can be upgraded with minimal service disruption.
NEW QUESTION # 58
After you have moved a registered logging device out of one ADOM and into a new ADOM, you run the following command: execute sql-local rebuild-adom <new-ADOM-name> What is the purpose of running this CLI command?
- A. To reset the ADOM disk quota enforcement to its default value
- B. To remove the analytics logs of the device from the old database
- C. To migrate the archive logs to the new ADOM
- D. To populate the new ADOM with analytical logs for the moved device, so you can run reports
Answer: D
Explanation:
When you move a registered logging device from one ADOM (Administrative Domain) to another in FortiAnalyzer, it's essential to ensure that the analytical logs for the moved device are available in the new ADOM to maintain continuity in reporting and log analysis. The command execute sql-local rebuild- adom <new-ADOM-name> is used specifically for this purpose. Running this command populates the new ADOM with the analytical logs of the moved device, enabling you to generate accurate and comprehensive reports based on the historical data of the device in its new ADOM context. This process ensures that the transition of devices between ADOMs does not lead to a loss of analytical insight or reporting capabilities for the device's traffic and events.
NEW QUESTION # 59
Refer to the exhibit.
Based on the partial outputs displayed, which devices can be members of a FortiAnalyzer Fabric?
- A. FortiAnalyzer1 and FortiAnalyzer3
- B. FortiAnalyzer1 and FortiAnalyzer2
- C. FortiAnalyzer2 and FortiAnalyzer3
- D. All devices listed can be members.
Answer: B
Explanation:
Based on the partial configuration output, the primary factor for determining which devices can be members of a FortiAnalyzer Fabric is the log-mode setting. Devices with the same log mode can be part of the same FortiAnalyzer Fabric.
FortiAnalyzer1: Log mode is set to collector.
FortiAnalyzer2: Log mode is set to collector.
FortiAnalyzer3: Log mode is set to analyzer.
Devices with the same log mode can be part of the same fabric. Since FortiAnalyzer1 and FortiAnalyzer2 both have their log modes set to collector, they can be members of a FortiAnalyzer Fabric.
Therefore, the correct answer is FortiAnalyzer1 and FortiAnalyzer2.
NEW QUESTION # 60
......
Passing Key To Getting FCP_FAZ_AD-7.4 Certified Exam Engine PDF: https://vcetorrent.passreview.com/FCP_FAZ_AD-7.4-exam-questions.html