100% Free JN0-362 Exam Dumps to Pass Exam Easily from PassReview
Free JN0-362 Exam Questions JN0-362 Actual Free Exam Questions
Certification Path
JN0-362 is an fundamental course and requires no certification as a pre-requisite.
NEW QUESTION 23
Router B is an OSPF router connected to both Area 0 and Area 2. Area 2 has been configured as a totally stubby area.Which three LSA types does Router B suppress from Area 2? (Choose Three.)
- A. Router LSA
- B. ASBR Summary LSA
- C. External LSA
- D. Summary LSA
- E. Network LSA
Answer: B,C,D
NEW QUESTION 24
Click the Exhibit button. Given the OSPF topology shown in the exhibit, how many unique link-state databases are present in the network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 25
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The router will remove the 0.0.0.0/0 route from the routing table when no BGP prefixes are present
- B. The router will remove the 0.0.0.0/0 route from the routing table when any BGP prefixes are present
- C. The router will install the 0.0.0.0/0 route into the routing table when no BGP prefixes are present
- D. The router will install the 0.0.0.0/0 route into the routing table when any BGP prefixes are present
Answer: A,D
NEW QUESTION 26
Which statement is true about routing instances on Junos devices?
- A. Each routing instance is a unique grouping of routing tables, interfaces, and routing protocol parameters.
- B. Routing information cannot be shared between routing instance.
- C. Junos device support only one routing instance.
- D. Each routing protocol runs in a separate routing instance.
Answer: A
NEW QUESTION 27
Click the Exhibit.
Referring to the exhibit, R-1 and R-2 are connected with a LAG on the ae0 interface.
However, the LAG is not operational.
Which action will solve this problem?
- A. Change the system ID on one device.
- B. Set the LACP system priority to a non-zero value on one device.
- C. Set the LACP system priority to a non-zero value on both devices.
- D. Change one device to use LACP passive mode.
Answer: A
NEW QUESTION 28
Which two statements are true about IP and GRE tunnels? (Choose two.)
- A. The TTL field is changed in the inner IP packet header
- B. Tunnel endpoints need a valid route to the remote endpoint
- C. The protocol field is changed in the inner IP packet header
- D. Tunnel traffic is encrypted
Answer: A,B
NEW QUESTION 29
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. The router will precalculate a valid path through the network for LSP r1-to-r3
- B. The router will analyze the traffic engineering database to determine the best path through the network
- C. The router will prune links with insufficient bandwidth from the path before beginning the signaling process
- D. The router will attempt to signal the LSP along the IGP shortest path to 192.168.100.1
Answer: D
NEW QUESTION 30
Which two IP addresses are considered Martian addresses? (Choose two.)
- A. 169.254.0.0/16
- B. 192.168.0.0/8
- C. 240.0.0.0/4
- D. 0.0.0.0/8
Answer: C,D
NEW QUESTION 31
Which three statements are true regarding the show system switchover operational mode command? (Choose three.)
- A. This command can only be issued on the backup Routing Engine.
- B. This command displays the status of the interface and process databases.
- C. This command displays the status of graceful switchover.
- D. This command can only be issued on the master Routing Engine.
- E. This command displays the status of the kernel database.
Answer: A,C,E
NEW QUESTION 32
Click the Exhibit button.
Referring to the exhibit, if there is a connection failure between router1 and router2, how much time will pass before the devices declare the BFD session dead?
- A. 600 ms
- B. 300 ms
- C. 900 ms
- D. 1200 ms
Answer: C
NEW QUESTION 33
You are asked to change the default TTL handling behavior on your Junos device to ensure that the RSVP- signaled LSPs in your MPLS network cannot be mapped.
Which configuration should be performed to accomplish this task?
- A. Configure the no-decrement-ttl parameter for each LSP on the ingress device
- B. Configure the no-propagate-ttl parameter for each LSP on the egress device
- C. Configure the no-decrement-ttl parameter for each LSP on the egress device
- D. Configure the no-propagate-ttl parameter for each LSP on the ingress device
Answer: B
NEW QUESTION 34
Click the Exhibit. You are receiving the same route prefix from four EBGP neighbors.
Based on the information provided in the exhibit, which route will be selected?
- A. Route 4
- B. Route 2
- C. Route 3
- D. Route 1
Answer: C
NEW QUESTION 35
Which action would you use to connect two virtual switches that are configured on the same router?
- A. Configure an irb interface
- B. Create a forwarding routing instance
- C. Create a VRF routing instance
- D. Connect the virtual switches with a cable
Answer: B
NEW QUESTION 36
What is the correct description of an Area Border Router (ABR)?
- A. An ABR is an OSPF router with all of its links within an area
- B. An ABR is an OSPF router that injects routing information from outside the OSPF AS
- C. An ABR is an OSPF router with links in two areas, connecting OSPF areas to the backbone
- D. An ABR is an OSPF router with at least one link in a Layer 2 area
Answer: C
NEW QUESTION 37
Click the Exhibit button.
You must create a static route on Router-A to the 10.10.5.0/24 network using 10.10.3.2 as the next hop.
Referring to the exhibit, which configuration accomplishes this task?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 38
Which statement is true about GRE encapsulation?
- A. Only the IP header is encapsulated by GRE.
- B. The entire packet is encapsulated by GRE.
- C. Only the IP payload is encapsulated by GRE.
- D. The entire frame is encapsulated by GRE.
Answer: A
NEW QUESTION 39
You want to disable MAC learning only for interface ge-0/0/0.0 on an MX Series device.
Which syntax will accomplish this task?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: A
NEW QUESTION 40
Which two statements are correct about default BGP route propagation? (Choose two.)
- A. IBGP speakers advertise IBGP-learned routes to other IBGP peers.
- B. EBGP speakers advertise IBGP-learned routes to other EBGP peers.
- C. IBGP speakers advertise EBGP-learned routes to other IBGP peers.
- D. EBGP speakers advertise IBGP-learned routes to other EBGP peers by using apolicy.
Answer: C,D
NEW QUESTION 41
Click the Exhibit button.
Your co-worker configures the ge-0/0/0 interface with an IPv6 address of 2001:db8:0:9::/64. After committing the configuration, your co-worker executes the command shown in the exhibit.
What is the fe80::206:aff:fe0e:e01/64 address in this scenario?
- A. the loopback address
- B. the multicast address
- C. the link-local address
- D. the statically assigned address
Answer: C
NEW QUESTION 42
Click the Exhibit button.
Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)
- A. to mark the tunnel down after the hold-time expires
- B. to reduce the risk of forwarding traffic through a stateless tunnel
- C. to mark the tunnel up after the hold-time expires
- D. to remove the tunnel interface from inet.0 after the hold-time expires
Answer: A,B
NEW QUESTION 43
Which configuration can be applied to ensure that no more than 600 MAC addresses are learned by a virtual switch?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 44
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. R2 is an ABR
- B. R1 is a backbone router
- C. R1 is an ABR
- D. R2 is an ASBR
Answer: A
NEW QUESTION 45
You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the locally connected CE router's interface. The address of the interface is 192.168.1.1; the VPN routing-instance is named VPN-A.Which command will accomplish this task?
- A. ping instance VPN-A 192.168.1.1
- B. ping VPN-A 192.168.1.1
- C. ping mpls l3vpn VPN-A 192.168.1.1
- D. ping vpn-instance VPN-A 192.168.1.1
- E. ping routing-instance VPN-A 192.168.1.1
Answer: E
NEW QUESTION 46
What is the Junos default router priority advertisement value for IS-IS?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Reference:
%20of%2064.
NEW QUESTION 47
Click the exhibit.
You have configured OSPF between two routers. The OSPF adjacency will not form.
Referring to the exhibit, what is the problem?
- A. Router is not receiving hellos on the configured interface.
- B. The OSPF version does not match on the configured interfaces.
- C. The router is not sending hellos on the configured interface.
- D. The area does not match on the configured interfaces.
Answer: D
NEW QUESTION 48
......
Latest 100% Passing Guarantee - Brilliant JN0-362 Exam Questions PDF: https://vcetorrent.passreview.com/JN0-362-exam-questions.html