Get 2024 Updated Free Fortinet NSE5_FAZ-7.0 Exam Questions and Answer
NSE5_FAZ-7.0 Dumps PDF and Test Engine Exam Questions
Fortinet NSE5_FAZ-7.0 Certification Exam is intended for IT professionals who have experience with Fortinet’s FortiAnalyzer products and want to demonstrate their expertise in this area. Fortinet NSE 5 - FortiAnalyzer 7.0 certification exam is suitable for network administrators, security engineers, and other IT professionals who are responsible for deploying and managing FortiAnalyzer products in their organizations. Fortinet NSE 5 - FortiAnalyzer 7.0 certification is also appropriate for individuals who want to enhance their career prospects and demonstrate their expertise in Fortinet’s FortiAnalyzer products.
Fortinet NSE5_FAZ-7.0 certification exam is designed for individuals who want to validate their knowledge and skills in using FortiAnalyzer 7.0. Fortinet NSE 5 - FortiAnalyzer 7.0 certification is ideal for security professionals who are responsible for managing and analyzing network security events and logs. NSE5_FAZ-7.0 exam covers a wide range of topics, including FortiAnalyzer installation, configuration, administration, and analysis.
NEW QUESTION # 39
An administrator has moved FortiGate A from the root ADOM to ADOM1.
Which two statements are true regarding logs? (Choose two.)
- A. Archived logs will be moved to ADOM1 from the root ADOM automatically.
- B. Logs will be presented in both ADOMs immediately after the move.
- C. Analytics logs will be moved to ADOM1 from the root ADOM automatically.
- D. Analytics logs will be moved to ADOM1 from the root ADOM after you rebuild the ADOM1 SQL database.
Answer: A,D
NEW QUESTION # 40
Refer to the exhibit.
Which image corresponds to the packet capture shown in the exhibit?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: C
NEW QUESTION # 41
What are offline logs on FortiAnalyzer?
- A. Logs that are collected from offline devices after they boot up.
- B. Logs that are indexed and stored in the SQL database.
- C. Compressed logs, which are also known as archive logs, are considered to be offline logs.
- D. When you restart FortiAnalyzer. all stored logs are considered to be offline logs.
Answer: C
NEW QUESTION # 42
You need to upgrade your FortiAnalyzer firmware.
What happens to the logs being sent to FortiAnalyzer from FortiGate during the time FortiAnalyzer is temporarily unavailable?
- A. FortiAnalyzer uses log fetching to retrieve the logs when back online
- B. The logfiled process stores logs in offline mode
- C. Logs are dropped
- D. FortiGate uses the miglogd process to cache the logs
Answer: D
NEW QUESTION # 43
What is the purpose of output variables?
- A. To use the output of the previous task as the input of the current task
- B. To store playbook execution statistics
- C. To save all the task settings when a playbook is exported
- D. To display details of the connectors used by a playbook
Answer: B
NEW QUESTION # 44
Refer to the exhibit.
Laptopt is used by several administrators to manage FortiAnalyzer. You want to configure a generic text filter that matches all login attempts to the web interface generated by any user other than "admin" and coming from Laptop1:
Which filter will achieve the desired result?
- A. operation-login & performed_on=="GUI(10.1.1.210)' & user!=admin
- B. operation-login & srcip==10.1.1.100 & dstip==10.1.1.210 & user==admin
- C. operation-login & performed_on=="GUI(10.1.1.100)" & user!=admin
- D. operation-login & dstip==10.1.1.210 & userl-admin
Answer: C
Explanation:
On there the task was to create a filter for failed logins from any other location but the local computer: "Add the text performed_on!~10.0.1.10. This includes any attempts coming from devices with an IP address that is not the one configured on the Local-Client computer."
NEW QUESTION # 45
What is Log Insert Lag Time on FortiAnalyzer?
- A. The amount of time FortiAnalyzer takes to receive logs from a registered device
- B. The amount of lag time that occurs when the administrator is rebuilding the ADOM database.
- C. The number of times in the logs where end users experienced slowness while accessing resources.
- D. The amount of time that passes between the time a log was received and when it was indexed on FortiAnalyzer.
Answer: D
NEW QUESTION # 46
View the exhibit:
What does the 1000MB maximum for disk utilization refer to?
- A. The disk quota for all devices in the ADOM
- B. The disk quota for the FortiAnalyzer model
- C. The disk quota for the ADOM type
- D. The disk quota for each device in the ADOM
Answer: A
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/743670/configuring-log-storage-policy
NEW QUESTION # 47
An administrator has moved FortiGate A from the root ADOM to ADOM1. However, the administrator is not able to generate reports for FortiGate A in ADOM1.
What should the administrator do to solve this issue?
- A. Use the execute sql-local rebuild-adom root command to rebuild the ADOM database.
- B. Use the execute sql-local rebuild-db command to rebuild all ADOM databases.
- C. Use the execute sql-local rebuild-adom ADOM1 command to rebuild the ADOM database.
- D. Use the execute sql-report run ADOM1 command to run a report.
Answer: C
NEW QUESTION # 48
What FortiGate process caches logs when FortiAnalyzer is not reachable?
- A. sqlplugind
- B. logfiled
- C. miglogd
- D. oftpd
Answer: C
NEW QUESTION # 49
Which two statements are correct regarding the export and import of playbooks? (Choose two.)
- A. A playbook that was disabled when it was exported, will be disabled when it is imported.
- B. Playbooks can be exported and imported only within the same FortiAnaryzer.
- C. You can import a playbook even if there is another one with the same name in the destination.
- D. You can export only one playbook at a time.
Answer: A,C
NEW QUESTION # 50
In the FortiAnalyzer FortiView, source and destination IP addresses from FortiGate devices are not resolving to a hostname.
How can you resolve the source and destination IP addresses, without introducing any additional performance impact to FortiAnalyzer?
- A. Configure local DNS servers on FortiAnalyzer
- B. Configure # set resolve-ip enable in the system FortiView settings
- C. Resolve IP addresses on a per-ADOM basis to reduce delay on FortiView while IPs resolve
- D. Resolve IP addresses on FortiGate
Answer: D
Explanation:
https://packetplant.com/fortigate-and-fortianalyzer-resolve-source-and-destination-ip/
"As a best practice, it is recommended to resolve IPs on the FortiGate end. This is because you get both source and destination, and it offloads the work from FortiAnalyzer. On FortiAnalyzer, this IP resolution does destination IPs only"
NEW QUESTION # 51
Which two statements are true regarding high availability (HA) on FortiAnalyzer? (Choose two.)
- A. All devices in a FortiAnalyzer HA cluster must run in the same operation mode: analyzer or collector.
- B. FortiAnalyzer HA can function without VRRP. and VRRP is required only if you have more than two FortiAnalyzer devices in a cluster.
- C. FortiAnalyzer HA supports synchronization of logs as well as some system and configuration settings.
- D. FortiAnalyzer HA implementation is supported by many public cloud infrastructures such as AWS, Microsoft Azure, and Google Cloud.
Answer: A,C
Explanation:
Reference:
FortiAnalyzer HA implementation works only in networks where Virtual Router Redundancy Protocol (VRRP) is permitted. Therefore it may not be supported by some public cloud infrastructures.
NEW QUESTION # 52
On the RAID management page, the disk status is listed as Initializing.
What does the status Initializing indicate about what the FortiAnalyzer is currently doing?
- A. FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal state
- B. FortiAnalyzer is ensuring that the parity data of a redundant drive is valid
- C. FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant
- D. FortiAnalyzer is functioning normally
Answer: C
Explanation:
Reference:
8977-00505692583a/FortiAnalyzer-5.6.10-Administration-Guide.pdf (40)
NEW QUESTION # 53
Which clause is considered mandatory in SELECT statements used by the FortiAnalyzer to generate reports?
- A. WHERE
- B. LIMIT
- C. ORDER BY
- D. FROM
Answer: D
Explanation:
Reference:
NEW QUESTION # 54
Refer to the exhibit.
What is the purpose of using the Chart Builder feature on FortiAnalyzer?
- A. You can add charts to generated reports using this feature.
- B. This feature allows you to build a chart under FortiView.
- C. In Log View, this feature allows you to build a chart and chart automatically, on the top 100 log entries.
- D. In Log View, this feature allows you to build a dataset and chart automatically, based on the filtered search results.
Answer: D
NEW QUESTION # 55
What are two of the key features of FortiAnalyzer? (Choose two.)
- A. Reports
- B. Centralized log repository
- C. Cloud-based management
- D. Virtual domains (VDOMs)
Answer: A,B
NEW QUESTION # 56
You are using RAID with a FortiAnalyzer that supports software RAID, and one of the hard disks on FortiAnalyzer has failed.
What is the recommended method to replace the disk?
- A. Downgrade your RAID level, replace the disk, and then upgrade your RAID level
- B. Perform a hot swap
- C. Clear all RAID alarms and replace the disk while FortiAnalyzer is still running
- D. Shut down FortiAnalyzer and then replace the disk
Answer: D
Explanation:
https://community.fortinet.com/t5/FortiAnalyzer/Technical-Note-How-to-swap-Hard-Disk-on-FortiAnalyzer/ta-p/194997?externalID=FD41397#:~:text=If%20a%20hard%20disk%20on,process%20known%20as%20hot%20swapping
NEW QUESTION # 57
Refer to the exhibit.
Which statement is correct regarding the event displayed?
- A. An incident was created from this event.
- B. The security event risk is considered open.
- C. The risk source is isolated.
- D. The security risk was blocked or dropped.
Answer: D
Explanation:
Events in FortiAnalyzer will be in one of four statuses. The current status will determine if more actions need to be taken by the security team or not.
The possible statuses are:
Unhandled: The security event risk is not mitigated or contained, so it is considered open.
Contained: The risk source is isolated.
Mitigated: The security risk is mitigated by being blocked or dropped.
(Blank): Other scenarios.
FortiAnalyzer_7.0_Study_Guide-Online pag. 206
NEW QUESTION # 58
You have recently grouped multiple FortiGate devices into a single ADOM. System Settings > Storage Info shows the quota used.
What does the disk quota refer to?
- A. The maximum disk utilization for the FortiAnalyzer model
- B. The maximum disk utilization for each device in the ADOM
- C. The maximum disk utilization for the ADOM type
- D. The maximum disk utilization for all devices in the ADOM
Answer: D
NEW QUESTION # 59
What is the purpose of output variables?
- A. To use the output of the previous task as the input of the current task
- B. To save all the task settings when a playbook is exported
- C. To display details of the connectors used by a playbook
- D. To store playbook execution statistics
Answer: A
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 242: Output variables allow you to use the output from a preceding task as an input to the current task.
"Output variables allow you to use the output from a preceding task as an input to the current task." FortiAnalyzer_7.0_Study_Guide-Online page 242
NEW QUESTION # 60
What is the purpose of the following CLI command?
- A. To encrypt log communications
- B. To add a log file checksum
- C. To add a unique tag to each log to prove that it came from this FortiAnalyzer
- D. To add the MD's hash value and authentication code
Answer: B
Explanation:
https://docs2.fortinet.com/document/fortianalyzer/6.0.3/cli-reference/849211/global
NEW QUESTION # 61
......
Fortinet NSE5_FAZ-7.0 certification exam is a valuable certification for IT professionals who are responsible for managing and monitoring network security events. Fortinet NSE 5 - FortiAnalyzer 7.0 certification validates the skills and knowledge required to configure, manage, and troubleshoot FortiAnalyzer 7.0. Candidates can prepare for the exam by taking the Fortinet NSE 5 – FortiAnalyzer 7.0 training course, which covers all the topics needed to pass the exam. Achieving this certification demonstrates a high level of expertise in using FortiAnalyzer 7.0 and can help IT professionals advance their careers.
Verified NSE5_FAZ-7.0 exam dumps Q&As with Correct 116 Questions and Answers: https://vcetorrent.passreview.com/NSE5_FAZ-7.0-exam-questions.html