Jan-2023 Fortinet NSE4_FGT-7.0 Certification Real 2023 Mock Exam
NSE4_FGT-7.0 Exam Questions and Valid PMP Dumps PDF
Which is the targeted audience for the Fortinet NSE4_FGT-7.0 Certification Exam?
The targeted audience for the Fortinet NSE4_FGT-7.0 Certification Exam is network security professionals. It includes network security experts and consultants. According to the NSE4_FGT-7.0 Dumps, it includes the people who work in network security-related companies. They include both, technical and non-technical people. Collector agent is also used by many companies. Bigger companies also hire people who have certified the Fortinet NSE4_FGT-7.0 Certification Exam.
NEW QUESTION 100
Which three methods are used by the collector agent for AD polling? (Choose three.)
- A. Novell API
- B. WMI
- C. NetAPI
- D. FortiGate polling
- E. WinSecLog
Answer: B,C,E
Explanation:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD47732
NEW QUESTION 101
Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 status is up. but phase 2 fails to come up.
Based on the phase 2 configuration shown in the exhibit, what configuration change will bring phase 2 up?
- A. On HQ-FortiGate, set Encryption to AES256.
- B. On Remote-FortiGate, set Seconds to 43200.
- C. On HQ-FortiGate, enable Auto-negotiate.
- D. On HQ-FortiGate, enable Diffie-Hellman Group 2.
Answer: A
Explanation:
Reference: https://docs.fortinet.com/document/fortigate/5.4.0/cookbook/168495 Explanation:
Encryption and authentication algorithm needs to match in order for IPSEC be successfully established.
NEW QUESTION 102
Refer to the exhibits.
Exhibit A.
Exhibit B.
An administrator creates a new address object on the root FortiGate (Local-FortiGate) in the security fabric.
After synchronization, this object is not available on the downstream FortiGate (ISFW).
What must the administrator do to synchronize the address object?
- A. Change the csf setting on ISFW (downstream) to sec fabric-objecc-unificacion defaulc.
- B. Change the csf setting on Local-FortiGate (root) to sec fabric-objecc-unificacion defaulc.
- C. Change the csf setting on ISFW (downstream) to sec configuracion-sync local.
- D. Change the csf setting on Local-FortiGate (root) to sec configuration-sync local.
Answer: D
Explanation:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD43820
NEW QUESTION 103
An administrator has configured the following settings:
- A. Denied users are blocked for 30 minutes.
- B. A session for denied traffic is created.
- C. The number of logs generated by denied traffic is reduced.
- D. Device detection on all interfaces is enforced for 30 minutes.
Answer: B,C
NEW QUESTION 104
Refer to the exhibit.
Based on the administrator profile settings, what permissions must the administrator set to run the diagnose firewall auth list CLI command on FortiGate?
- A. Read/Write permission for Firewall
- B. CLI diagnostics commands permission
- C. Custom permission for Network
- D. Read/Write permission for Log & Report
Answer: B
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD50220
NEW QUESTION 105
Refer to the exhibit.
The exhibit contains a network diagram, firewall policies, and a firewall address object configuration.
An administrator created a Deny policy with default settings to deny Webserver access for Remote-user2. Remote-user2 is still able to access Webserver.
Which two changes can the administrator make to deny Webserver access for Remote-User2? (Choose two.)
- A. Disable match-vip in the Deny policy.
- B. Set the Destination address as Web_server in the Deny policy.
- C. Set the Destination address as Deny_IP in the Allow-access policy.
- D. Enable match vip in the Deny policy.
Answer: B,D
NEW QUESTION 106
Refer to the exhibit.
The exhibit contains the configuration for an SD-WAN Performance SLA, as well as the output of diagnose sys virtual-wan-link health-check.
Which interface will be selected as an outgoing interface?
- A. port1
- B. port4
- C. port2
- D. port3
Answer: A
Explanation:
Explanation
Port 1 shows the lowest latency.
NEW QUESTION 107
Refer to the exhibit.
Which contains a Performance SLA configuration.
An administrator has configured a performance SLA on FortiGate. Which failed to generate any traffic. Why is FortiGate not generating any traffic for the performance SLA?
- A. You need to turn on the Enable probe packets switch.
- B. There may not be a static route to route the performance SLA traffic.
- C. Participants configured are not SD-WAN members.
- D. The Ping protocol is not supported for the public servers that are configured.
Answer: A
Explanation:
Reference:
https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/478384/performance-sla-linkmonitoring
NEW QUESTION 108
Refer to the exhibits.
Exhibit A shows system performance output. Exhibit B shows a FortiGate configured with the default configuration of high memory usage thresholds. Based on the system performance output, which two statements are correct? (Choose two.)
- A. Administrators cannot change the configuration.
- B. FortiGate has entered conserve mode.
- C. FortiGate will start sending all files to FortiSandbox for inspection.
- D. Administrators can access FortiGate only through the console port.
Answer: A,B
Explanation:
Reference: https://www.skillfulist.com/fortigate/fortigate-conserve-mode-how-to-stop-it-and-what-it-means/
NEW QUESTION 109
Refer to the exhibits.
Exhibit A.
Exhibit B.
An administrator creates a new address object on the root FortiGate (Local-FortiGate) in the security fabric. After synchronization, this object is not available on the downstream FortiGate (ISFW).
What must the administrator do to synchronize the address object?
- A. Change the csf setting on ISFW (downstream) to sec fabric-objecc-unificacion defaulc.
- B. Change the csf setting on Local-FortiGate (root) to sec fabric-objecc-unificacion defaulc.
- C. Change the csf setting on ISFW (downstream) to sec configuracion-sync local.
- D. Change the csf setting on Local-FortiGate (root) to sec configuration-sync local.
Answer: D
NEW QUESTION 110
Refer to the exhibit.
The exhibit shows a CLI output of firewall policies, proxy policies, and proxy addresses.
How
does FortiGate process the traffic sent to http://www.fortinet.com?
- A. Traffic will not be redirected to the transparent proxy and it will be allowed by firewall policy ID 1.
- B. Traffic will be redirected to the transparent proxy and it will be denied by the proxy implicit deny policy.
- C. Traffic will be redirected to the transparent proxy and It will be allowed by proxy policy ID 1.
- D. Traffic will be redirected to the transparent proxy and it will be allowed by proxy policy ID 3.
Answer: B
NEW QUESTION 111
What is the limitation of using a URL list and application control on the same firewall policy, in NGFW policy-based mode?
- A. It limits the scope of application control to scan application traffic based on application category only.
- B. It limits the scope of application control to scan application traffic on DNS protocol only.
- C. It limits the scope of application control to the browser-based technology category only.
- D. It limits the scope of application control to scan application traffic using parent signatures only
Answer: A
NEW QUESTION 112
Refer to the exhibit, which contains a session diagnostic output.
Which statement is true about the session diagnostic output?
- A. The session is in TCP ESTABLISHED state.
- B. The session is a bidirectional UDP connection.
- C. The session is a UDP unidirectional state.
- D. The session is a bidirectional TCP connection.
Answer: B
NEW QUESTION 113
Refer to the exhibit.
The exhibit displays the output of the CLI command: diagnose sys ha dump-by vcluster.
Which two statements are true? (Choose two.)
- A. FortiGate SN FGVM010000065036 HA uptime has been reset.
- B. FortiGate SN FGVM010000064692 is the primary because of higher HA uptime.
- C. FortiGate devices are not in sync because one device is down.
- D. FortiGate SN FGVM010000064692 has the higher HA priority.
Answer: A,D
Explanation:
1. Override is disable by default - OK
2. "If the HA uptime of a device is AT LEAST FIVE MINUTES (300 seconds) MORE than the HA Uptime of the other FortiGate devices, it becomes the primary" The question here is : HA Uptime of FGVM01000006492 > 5 minutes? NO - 198 seconds < 300 seconds (5 minutes) Page 314 Infra Study Guide.
https://docs.fortinet.com/document/fortigate/6.0.0/handbook/666653/primary-unit-selection-with-override-disabled-default
NEW QUESTION 114
An administrator needs to increase network bandwidth and provide redundancy.
What interface type must the administrator select to bind multiple FortiGate interfaces?
- A. Redundant interface
- B. Software Switch interface
- C. VLAN interface
- D. Aggregate interface
Answer: D
NEW QUESTION 115
Refer to the exhibit.
Given the routing database shown in the exhibit, which two statements are correct? (Choose two.)
- A. The port3 default route has the lowest metric.
- B. The port3 default route has the highest distance.
- C. There will be eight routes active in the routing table.
- D. The port1 and port2 default routes are active in the routing table.
Answer: B,D
NEW QUESTION 116
Which two statements are correct regarding FortiGate FSSO agentless polling mode? (Choose two.)
- A. FortiGate uses the SMB protocol to read the event viewer logs from the DCs.
- B. FortiGate queries AD by using the LDAP to retrieve user group information.
- C. FortiGate uses the AD server as the collector agent.
- D. FortiGate points the collector agent to use a remote LDAP server.
Answer: A,B
Explanation:
Fortigate Infrastructure 7.0 Study Guide P.272-273
https://kb.fortinet.com/kb/documentLink.do?externalID=FD47732
NEW QUESTION 117
Which three statements about security associations (SA) in IPsec are correct? (Choose three.)
- A. An SA never expires.
- B. Both the phase 1 SA and phase 2 SA are bidirectional.
- C. Phase 2 SA expiration can be time-based, volume-based, or both.
- D. Phase 2 SAs are used for encrypting and decrypting the data exchanged through the tunnel.
- E. A phase 1 SA is bidirectional, while a phase 2 SA is directional.
Answer: C,D,E
NEW QUESTION 118
An administrator wants to configure Dead Peer Detection (DPD) on IPSEC VPN for detecting dead tunnels. The requirement is that FortiGate sends DPD probes only when no traffic is observed in the tunnel.
Which DPD mode on FortiGate will meet the above requirement?
- A. On Idle
- B. Disabled
- C. Enabled
- D. On Demand
Answer: A
NEW QUESTION 119
Which two statements are correct about SLA targets? (Choose two.)
- A. SLA targets are used only when referenced by an SD-WAN rule.
- B. SLA targets are required for SD-WAN rules with a Best Quality strategy.
- C. You can configure only two SLA targets per one Performance SLA.
- D. SLA targets are optional.
Answer: A,D
NEW QUESTION 120
An administrator needs to increase network bandwidth and provide redundancy.
What interface type must the administrator select to bind multiple FortiGate interfaces?
- A. Redundant interface
- B. Software Switch interface
- C. VLAN interface
- D. Aggregate interface
Answer: D
Explanation:
Reference: https://forum.fortinet.com/tm.aspx?m=120324
https://www.fortinetguru.com/2016/12/aggregate-interfaces/
NEW QUESTION 121
View the exhibit.
Which of the following statements are correct? (Choose two.)
- A. Dead peer detection must be disabled to support this type of IPsec setup.
- B. This is a redundant IPsec setup.
- C. This setup requires at least two firewall policies with the action set to IPsec.
- D. The TunnelB route is the primary route for reaching the remote site. The TunnelA route is used only if the TunnelB VPN is down.
Answer: B,D
NEW QUESTION 122
Which two statements are correct about NGFW Policy-based mode? (Choose two.)
- A. NGFW policy-based mode policies support only flow inspection
- B. NGFW policy-based mode supports creating applications and web filtering categories directly in a firewall policy
- C. NGFW policy-based mode can only be applied globally and not on individual VDOMs
- D. NGFW policy-based mode does not require the use of central source NAT policy
Answer: A,B
NEW QUESTION 123
Refer to the exhibit to view the application control profile.
Users who use Apple FaceTime video conferences are unable to set up meetings.
In this scenario, which statement is true?
- A. The category of Apple FaceTime is being monitored.
- B. Apple FaceTime belongs to the custom monitored filter.
- C. Apple FaceTime belongs to the custom blocked filter.
- D. The category of Apple FaceTime is being blocked.
Answer: C
Explanation:
Explanation
FaceTime categorized (filtered) under "Excessive-Bandwidth" and custom filter override set to block this.
Also we know that users can't use FaceTime
NEW QUESTION 124
Refer to the exhibit.
Which contains a network diagram and routing table output.
The Student is unable to access Webserver.
What is the cause of the problem and what is the solution for the problem?
- A. The first reply packet for Student failed the RPF check.
This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1. - B. The first reply packet for Student failed the RPF check.
This issue can be resolved by adding a static route to 203.0.114.24/32 through port3. - C. The first packet sent from Student failed the RPF check.
This issue can be resolved by adding a static route to 203.0.114.24/32 through port3. - D. The first packet sent from Student failed the RPF check.
This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1.
Answer: C
NEW QUESTION 125
......
How to pass Fortinet NSE4_FGT-7.0 Certification Exam in the first attempt
Tips to get your NSE4_FGT-7.0 certification
Here is the way to get success in the Fortinet NSE4_FGT-7.0 Certification Exam
The NSE4_FGT-7.0 certification is an industry recognition that is earned by network professionals who want to show their skills and knowledge in Fortinet NSE 4 Network Security products and solutions. The NSE4_FGT-7.0 certification exam is designed for network security professionals with intermediate knowledge and skills necessary to manage the day-to-day operation of FortiGate appliances, as well as configuration and monitoring of the full range of Fortinet security and networking capabilities. This exam covers the basic understanding of security threats and how to use Fortinet products to detect and mitigate those threats, manage configuration, administer policies, generate reports, monitor network activities, troubleshoot common problems, and more. Disableset webfilter, Outgoing interface, and web application firewall can be configured with FortiGate Security appliances.
Here we are going to discuss the resources including NSE4_FGT-7.0 Dumps that we can use to get ready for the NSE4_FGT-7.0 certification Exam. Earning the NSE4_FGT-7.0 certification will set individuals apart from their competition, thereby enticing employers to hire them based on the extra knowledge they have proven they hold. Local quick mode selector of the exam is available for those who are short on time. In this guide, we are going to explain the Fortinet NSE4_FGT-7.0 exam, the certification requirements, how to prepare for it, and the steps you can take to get certified. Information like cost, number of questions, topics covered, and exam format will be covered here. So, let us get started!
NSE4_FGT-7.0 Question Bank: Free PDF Download Recently Updated Questions: https://vcetorrent.passreview.com/NSE4_FGT-7.0-exam-questions.html