Latest NCSE-Core Exam Dumps Nutanix Exam from Training Expert PassReview
Pass Nutanix Nutanix Certified Systems Engineer-Core (NCSE-Core) PDF Dumps | Recently Updated 197 Questions
The NCSE-Core certification is a valuable certification for IT professionals who are looking to advance their careers in the field of Nutanix technology. Nutanix Certified Systems Engineer-Core (NCSE-Core) certification is recognized globally and is highly respected by employers. Nutanix Certified Systems Engineer-Core (NCSE-Core) certification validates the candidate's skills and knowledge in the field of Nutanix technology, making them an asset to any organization that uses Nutanix solutions.
NEW QUESTION # 113
A customer asks for a quote for a hybrid cluster to run general purpose VMs and an ERP application. The customer has a VSAN ReadyNode quote already and is looking for a comparable Nutanix solution. They share the following bill of materials
* 3 Hosts
* 2x E5-2640v4 CPUs
* 512GB RAM
* 1 x 480GB SSD
* 2 x 8TB HDD
* 2 x 1GB NIC
What are two reasons to avoid sizing to match a competitor's bill of materials? (Choose two)
- A. Sizing data from the competitor was shared.
- B. There is no visibility to the actual customer requirements.
- C. Nutanix Collector is better at capturing the metrics needed
- D. The assumptions made in the competitor's sizing cannot be determined.
Answer: B,D
NEW QUESTION # 114
A prospect needs to refresh their environment but has a very small budget for the project. Four years after their last infrastructure refresh, the prospect's core datacenter is only running at 40% utilization. In addition, they have 25 satelite offices.
Each office has a requirement to run 4 to 6 VMs locally.
Which two Nutanix platform capabilities should the SE hlight to address the prospects concerns? (Choose two)
- A. Single node backup
- B. Pay as you grow
- C. Multi-site management
- D. Automated data storage tiering
- E. Software only
Answer: B,C
NEW QUESTION # 115
Prospective customer explains their current infrastructure and upcoming goals. They are a fast-growing software company with approximately 3000 employees. Engineering accounts for approximately half of total staff and is behind on product releases.
This department has been building their own infrastructure using available hardware, SaaS offerings, and public cloud.
There's a new CIO attempting to gain control of existing and incoming
information systems while supporting the agile environment responsible for their rapid innovation with a minimal staff. From this information, which two addressable pain points or gaps should be discerned?(Choose two)
- A. ""Shadow IT"" that increases the risk of security breaches and brand damage
- B. System availability issues
- C. significantly degraded end user experience
- D. SQL Server performance issues
- E. Slow response time from the infrastructure group (SLAs) that could result in product release delays
Answer: B,E
NEW QUESTION # 116
An SE needs to leverage Change Block Tracking when using Xtract to migrate VMs from ESXi to AHV.
Which two source VM requirements should the SE verify? (Choose two)
- A. VMware Tools installed
- B. Nutanix Guest Tools installed.
- C. Minimum guest OS version
- D. Virtual hardware version
Answer: B,C
NEW QUESTION # 117
A customer needs to image nodes that are either bare metal or require a different hypervisor. Which Nutanix tool should be used?
- A. Era
- B. Move
- C. Foundation
- D. Prism Central
Answer: C
NEW QUESTION # 118
A customer plans to migrate a business critical. high transaction application to Nutanix Currently the application is running on a physical server with 256GB of RAM and 12 CPU cores at > 80% utilization To run the VM on a single NUMA node, which processor configuration should the systems engineer recommend for this workload?
- A. (2) CPUs (10 Cores each @ 3.4GHz). 20 Cores total
- B. (2) CPUs (8 Cores each 2.1GHz), 16 Cores total
- C. (2) CPUs (16 Cores each 2.8GHz). 32 Cores total
- D. (2) CPUs (8 Cores each 6) 1.8GHz). 16 Cores total
Answer: C
NEW QUESTION # 119
A customer wants to evaluate the performance impact of failing a node while running workloads on the cluster. Which tool should a systems engineer use to accomplish this task?
- A. X-Ray
- B. demo.Nutanix.com
- C. Sizer
- D. Move
Answer: A
NEW QUESTION # 120
An SE and a prospect decide on a specific node configuration. The SE changes the Sizer scenario from Automatic to manual mode to select the exact configuration decided with the prospect.
What additional detail should the SE now consider in the Sizing scenario?
- A. Curator Capacity.
- B. CVM Memory overhead.
- C. Block Awareness.
- D. N + 1 availability.
Answer: D
NEW QUESTION # 121
A Nutanix customer needs to migrate 1000VMs from ACME Public Cloud to a local Nutanix cluster ACME Public Cloud operates on VMware ESXi, Hp ProLiant Servers with 3PAR storage. ACME Public Cloud denies customers access to vCenter or ESXi hosts But they do replicate a copy of the virtual disks to external storage.
Which method should the customer use to migrate the VMs to a local Nutanix Cluster?
- A. Use the latest copy of VMs on external storage to import on the local Nutanix cluster
- B. Use Xtract for VMs to migrate VMs from ACME Public Cloud vCenter to local Nutanix cluster.
- C. Use Calm to automate and orchestrate deployment on the local Nutanix cluster.
- D. Deploy Nutanix Community Edition in ACME Public Cloud and replicate VMs to local Nutanix cluster.
Answer: A
NEW QUESTION # 122
A customer's current AHV cluster for mixed server workloads consists of 7 NX-3060-G6 nodes with intel Skylake processors spread across two blocks. Growing demand for resources requires the customer to order three additional NX-3060-G7 nodes with Intel Cascade Lake processors. Which supported approach allows the customer the most efficient use of their additional resources?
- A. Create a new cluster using a new block populated by the three additional nodes.
- B. Expand the existing cluster by adding a new block populated with the three additional nodes
- C. Expand the cluster by fully populating the existing blocks, and adding a new block populated with two nodes
- D. Expand the cluster by fully populating the existing blocks with the three additional nodes
Answer: B
NEW QUESTION # 123
A customer needs to expand an existing cluster to accommodate workloads. The workloads require 5TB of storage capacity (1.2TB of working set data), 64GB of memory, and 10 physical CPU cores. Their current cluster is configured as follows:
* 4x NX-3060-G5 nodes
* Each node is configured with 2x E5-2620v4 processors (8 Cores each), 128GB RAM, 2x 960GB SSDs, and 4x 2TB HDDs
* The cluster is configured as RF2 and is sized for N+1 availability
* Each CVM is configured with 32GB of memory
To maintain optimal metadata balance and data availability, which configuration should be recommended?
- A. 1x NX-6035C-G5 - 2x E5-2620v4 processors, 128GB RAM, 1x 1920GB SSDs, 5x 4TB HDDs
- B. 3x NX-1065-G5 - 2x E5-2620v4 processors, 128GB RAM, 1x 1920GB SSDs, 2x 4TB HDDs
- C. 1x NX-3060-G5 - 2x E5-2620v4 processors, 128GB RAM, 2x 1920GB SSDs, 4x 2TB HDDs
- D. 2x NX-3060-G5 - 2x E5-2620v4 processors, 128GB RAM, 2x 960GB SSDs, 4x 2TB HDDs
Answer: D
NEW QUESTION # 124
During a meeting with a fortune 100 prospect, an SE achieves technical buy-in from the architecture team. The prospect shares that their management recently attended an executive briefing with Cisco and was impressed by the vision presented.
Management is pushing the arching the architecture tea to adopt Cisco as their HCI standard based on a beief that Nutanix is not a major player.
Which resource should an SE highlight?
- A. ESG Performance Analysis
- B. Garther magic Quadrant
- C. Reference architectures
- D. Net Promoter Score
Answer: B
NEW QUESTION # 125
Which CVM service rs responsible for providing storage to the hypervisor?
- A. Zookeeper
- B. Genesis
- C. Stargate
- D. Curator
Answer: C
NEW QUESTION # 126
A customer performs a 1-click, non-disruptive upgrade on a 3-node Nutanix cluster. While the CVM on Node A is rebooting, a VM on Node A overwrites an existing block of dat a. How does Nutanix AOS ensure data integrity during the upgrade? Choose Two
- A. AOS marks the replica as read only and waits until the original replica is back online to prevent corruption.
- B. AOS only overwrite the available copy and waits until the original copy is back online before restoring resiliency
- C. AOS writes two copies across the remaining nodes to maintain resiliency
- D. AOS leverages Erasure Coding to maintain resiliency.
Answer: B,C
NEW QUESTION # 127
Whthin an RVtools output, which tab provides actual utilization information on thick provisioned disks?
- A. vinfo
- B. vDisk
- C. vPartition
- D. vCluster
Answer: A
NEW QUESTION # 128
A customer needs to expand an existing cluster to accommodate workloads. The workloads require 5TB of storage capacity (1.2TB of working set data), 64GB of memory, and 10 physical CPU cores. Their current cluster is configured as follows:
* 4x NX-3060-G5 nodes
* Each node is configured with 2x E5-2620v4 processors (8 Cores each), 128GB RAM, 2x 960GB SSDs, and
4x 2TB HDDs
* The cluster is configured as RF2 and is sized for N+1 availability
* Each CVM is configured with 32GB of memory
To maintain optimal metadata balance and data availability, which configuration should be recommended?
- A. 1x NX-6035C-G5 - 2x E5-2620v4 processors, 128GB RAM, 1x 1920GB SSDs, 5x 4TB HDDs
- B. 3x NX-1065-G5 - 2x E5-2620v4 processors, 128GB RAM, 1x 1920GB SSDs, 2x 4TB HDDs
- C. 1x NX-3060-G5 - 2x E5-2620v4 processors, 128GB RAM, 2x 1920GB SSDs, 4x 2TB HDDs
- D. 2x NX-3060-G5 - 2x E5-2620v4 processors, 128GB RAM, 2x 960GB SSDs, 4x 2TB HDDs
Answer: D
NEW QUESTION # 129
An SE is performing workload discovery with an SMB prospect running SQL Server. The databases is less than 1 TB, but its performance and uptime are critical to the prospect's business operations. Sizer sugests using
1065S nodes.
Which aspects of the NX-1065S-G5 would cause an SE to filter out that nodel from Sizer's Automatic configuration? (choose two.)
- A. Single Socket Processor
- B. Single Power Supply
- C. Single HDD
- D. 1Gb Networking
- E. Limited to 4 nodes
Answer: A,D
NEW QUESTION # 130
Refer to the exhibit.
Based on the Sizing scenario, what level of resiliency can be inferred about the configuration?
- A. N+0
- B. N+1
- C. N+2
- D. RF3
Answer: A
NEW QUESTION # 131
A customer recently deployed Nutanix for VDI workloads and determine AFS is suitable for their departmental shares. They ask about infrastructure requirements providing the following file workloads specifics:
* 11.8 TB of data.
* 360000 files.
* 2400 Users.
* 800 shares.
Based on the exhibit,
which criteria shared by customer supports the requirement of additional nodes?
- A. 11.8 TB of data.
- B. 2400 Users.
- C. 800 shares.
- D. 360000 files.
Answer: D
NEW QUESTION # 132
A prospect facing an upcoming Vmware ELA renewal has a management directive to move to the public cloud due to perceived cost savings. Their virtualization team is currently struggling with refactoring applications for AWS. As a result, the virtualization team is pushing to evaluate VXRail and renew their VMware ELA.
Which two aspects of Nutanix shoud the SE Highlight? (Choose two)
- A. Multi-cluster Management
5. Multi-hypervisor Support - B. Nutanix AHV
- C. Nutanix Calm
- D. Cloud Connect
Answer: B,C
NEW QUESTION # 133
......
Updated Test Engine to Practice NCSE-Core Dumps & Practice Exam: https://vcetorrent.passreview.com/NCSE-Core-exam-questions.html